Monday, April 30, 2012

Google Map Location British Council City at Dhaka


Google Drive Part 2 A Cloud based free Storage How to Use in Hindi by Ja...

Google Creates an Android Bartender

Google Apps for Business: Gmail Overview (German)

Google Apps Overview (German)

Ex Gratia Lintel - Coogan's Run - BBC

Data Soft Location View! City at Dhaka,Bangladesh

Data Soft Location View! City at Dhaka,Bangladesh:


Data Soft Location View! City at Dhaka,Bangladesh
Date: Apr 28, 2012
Number of Photos in Album: 87
View Album

Understanding the Metal-DirectedGrowth of Single-CrystalM-TCNQF4 Organic Nanowires with Time-Resolved, in SituX-ray Diffraction and First-Principles Theoretical Studies

Understanding the Metal-Directed
Growth of Single-Crystal
M-TCNQF4 Organic Nanowires with Time-Resolved, in Situ
X-ray Diffraction and First-Principles Theoretical Studies
:
TOC Graphic

Journal of the American Chemical Society


DOI: 10.1021/ja301456p



Cation-Size-Mismatch Tuningof Photoluminescence inOxynitride Phosphors

Cation-Size-Mismatch Tuning
of Photoluminescence in
Oxynitride Phosphors
:
TOC Graphic

Journal of the American Chemical Society


DOI: 10.1021/ja301593z



AutoCAD Release History

AutoCAD Release History:



Shaan Hurley has always been my reference for AutoCAD history and has an excellent page on this. So the question came up the other day "What was the first version of AutoCAD for Windows". My memory told me it was Release 12, but I was not quite sure. A little searching turned up this document which confirms that R12c3 (Release 12, patch c3) was the first major release for Windows (see first comment below regarding R11 for Windows). Since Windows itself taxed most affordable computer systems back then, most people probably stayed on DOS, Solaris, or one of the other platforms for AutoCAD at that time.
If you have a DWG file and are not sure about its version, drop it into Notepad or some other ASCII/Hex editor and look at the first 6 bytes and compare to the table below.















DWG file header

6 byte header

AutoCAD Version

AC1027

AutoCAD 2013

AC1024

AutoCAD 2010,2011,2012

AC1021

AutoCAD 2007, 2008, 2009

AC1018

AutoCAD 2004, 2005, 2006

AC1015

AutoCAD 2000, 2000i, 2002

AC1014

AutoCAD Release 14

AC1013

AutoCAD Release 13

AC1009

AutoCAD Release 11, 12

AC1006

AutoCAD Release 10

AC1004

AutoCAD Release 9

AC1003

AutoCAD 2.6

AC1002

AutoCAD 2.5


Below is a Release 13 installation floppy disc. You needed this to go along with the CD-ROM, also shown below.
Release 13 installation floppy disc
Release 13c4a installation CD-ROM







Creating a command for a new Contextual Tab

Creating a command for a new Contextual Tab:



This tutorial serves two purposes. One is to create a new tool to convert Line or Arc entities to Polylines, and the other purpose is showing how to integrating this tool into a contextual tab.
We're using AutoCAD 2013, and by default there are no contextual tabs for Line or Arc entities. Let's create a tool to convert these object types to polylines and put it on a contextual tab.
Start by opening the CUI editor by running the CUI command. In the upper left pane, under the ACAD menu, expand Ribbon, and then expand Contextual Tab States.

Scroll down until you see "Line Selected" and click it. Notice that there is nothing under here and nothing shows up in the right pane. If you check "Arc Selected", you will see the same thing.
In order to add something here, we need to do five (5) steps.


  1. Create a new command.


  2. Create a new Panel


  3. Create a new Tab


  4. Add the command to the new Panel and add the Panel to the new Tab


  5. Add the new Tab to the Contextual Tab States for Arc and Line entities


Step 1 - In the lower left portion of the CUI, click the New Command icon to create a new command. Over on the right side, enter the name "Convert Line or Arc to Polyline", and in the Macro field, copy this macro exactly as printed here.
._pedit $M=$(if,$(=,$(getvar"PEDITACCEPT"),0),y,)^C^C

In the Images area, choose an existing image or browse to find one.

Step 2 - In the upper left pane, right click on Panels and choose New Panel. It will scroll down automatically and the name of the Panel will be highlighted - Enter a name, like "My Tools"

Step 3 - In the upper left pane again, scroll up above Panels, right click on Tabs and choose New Tab and give it the name "Line/Arc Tools".

Step 4 - Now it's time to put the puzzle together. Left-click drag the new command you made in Step 1, into Row 1 of the "My Tools" Panel you created in Step 2. Now left-click drag the "My Tools" panel into the new "Line/Arc Tools" tab.
Step 5 - Finally add the "Line/Arc Tools" tab to the Contextual Tab State named "Line Selected". Then drag and drop it one more time into the Contextual Tab State named "Arc Selected". Click OK to save the CUI and close the CUI editor.

Now when you get back into your drawing, draw a line and arc. Select ONE of them, and the proper contextual tab should appear that contains one panel, containing one command - the "Convert Line or Arc to Polyline" command that we added in Step 1. Pick this command and the entity will be converted to a polyline.
Now this is just a simple example and only supports a single object selected. You could tweak the macro to support multiple entities, create a lisp routine to do even more and use this in place of the macro we entered above - not to mention create other commands for lines and or arc and add them to the contextual tab. From there, you could do this for other entity types.
What will you do?






Twelve South HoverBar: Review and giveaway

Twelve South HoverBar: Review and giveaway:

Image


Every once in a while I receive hardware for review that ends up becoming such an integral part of my setup that I forget to write the review, and that's been the case with the Twelve South HoverBar (US$79.99). The HoverBar is a unique product that's meant to mount an iPad to a desk, a cubicle wall, an iMac or an Apple Display. Let's take a look at the HoverBar, and then you'll have an opportunity to win one from Twelve South and TUAW.


Design


Twelve South is well-known for two things: the fact that they make accessories for Apple products only and their great design sense. In the case of the HoverBar, the product can actually be used with two Apple products. During my review, I used it with an iPad 2 and a 27" iMac to create a unique side-by-side layout of those two devices.
The HoverBar is currently designed to hold only an iPad 2, not the new iPad or the original model. However, the company is working on the design of a clip that works with the new iPad and will be available at a price to current HoverBar owners.
The HoverBar is perfect for those situations where you want an iPad easily at hand but don't necessarily want to hold onto it. It becomes a third arm and hand to hold the iPad in place. I used the HoverBar with Avatron's Air Display to turn my iPad 2 into a small Mac monitor.


Installing the HoverBar is quite simple. You attach a clamp that is used to "grab" onto a desktop or the upright of an iMac to a flexible arm. The other end of the arm has a ball and socket joint that is connected to a plastic iPad clip. Pop the iPad into the clip, adjust the arm to the location where you want the iPad to sit, and you're ready to go.


Functionality


Due to the weight of the iPad, I found that the flexible arm tended to sag a little bit after I put the iPad into the clip. That was easily remedied by bending the flexible arm up slightly. I also found that tapping on the iPad to bring up an app tended to cause the iPad to move a bit; once again, there was a simple workaround -- I started holding the iPad clip with one hand when tapping on the iPad screen to keep it from moving.
The clamp that attaches to your desktop, display, or iMac needs to be tightened down good; an iPad on the end of a flexible arm creates a bit of torque, and you'll want to make sure that you use the included hex wrench to tighten the vise-like clamp as much as possible. I neglected to do this the first time I attached the HoverBar to my iMac, and unfortunately it slipped off the iMac. My iPad was OK, but the flexible arm flipped up and destroyed a small Zuni fetish sculpture carved out of stone that was adorning my desk. Ooops.
For those who need to use an iPad and Mac in close proximity, the HoverBar is unequaled. As usual, Twelve South hit the market first with a product that is beautiful, functional and well-built.


Giveaway


And now, a chance to win our review HoverBar! Note that this particular model is designed for the iPad 2 -- if you have a third-generation iPad you'll need to wait until the new iPad clip is available, and the purchase of that piece is on your dime. But if you have an iPad 2, this HoverBar is just what you want. Here are the rules:


  • Open to legal US residents of the 50 United States, the District of Columbia and Canada (excluding Quebec) who are 18 and older.


  • To enter, fill out the form below completely and click or tap the Submit button.


  • The entry must be made before May 2, 2012 at 11:59PM Eastern Standard Time.


  • You may enter only once.


  • One winner will be selected and will receive a Twelve South HoverBar valued at $79.99


  • Click Here for complete Official Rules.





Twelve South HoverBar: Review and giveaway originally appeared on TUAW - The Unofficial Apple Weblog on Sun, 29 Apr 2012 17:00:00 EST. Please see our terms for use of feeds.



Source | Permalink | Email this | Comments

Bing versus Google: Search engine showdown

Bing versus Google: Search engine showdown: Bing versus Google: Search engine showdown PCWorld pits Google and Bing against each other in a quest to determine which one is better.




Microsoft issues working Office 2011 SP2 update

Microsoft issues working Office 2011 SP2 update: Microsoft issues working Office 2011 SP2 update Microsoft missed the mark with its initial SP2 upgrade to Office 2011. It's since issued a new version that works.




What you need to know: Cyber Information and Security Protection Act

What you need to know: Cyber Information and Security Protection Act: What you need to know: Cyber Information and Security Protection Act The U.S. House of Representatives passed the Cyber Information and Security Protection Act late Thursday despite concerns over user privacy, the specter of...




How Apple Minimizes its Corporate Tax Burden

How Apple Minimizes its Corporate Tax Burden: In the latest installment of its "iEconomy" series, The New York Times takes a look at how Apple minimizes its corporate tax burden, taking advantage of a number of legal maneuvers and loopholes around the world. Apple's strategies are of course fully legal and used by many other corporations, but with a spotlight on Apple as it has rapidly risen to become the world's most valuable publicly-traded company with record-setting profits, it has obviously attracted much attention about how it handles its money.

Apple, for instance, was among the first tech companies to designate overseas salespeople in high-tax countries in a manner that allowed them to sell on behalf of low-tax subsidiaries on other continents, sidestepping income taxes, according to former executives. Apple was a pioneer of an accounting technique known as the “Double Irish With a Dutch Sandwich,” which reduces taxes by routing profits through Irish subsidiaries and the Netherlands and then to the Caribbean. Today, that tactic is used by hundreds of other corporations — some of which directly imitated Apple’s methods, say accountants at those companies.

Among the tactics used by Apple:





- Setting up subsidiaries in low-tax locations such as Nevada, Ireland, Netherlands, Luxembourg, and the British Virgin Islands, routing as much revenue as possible through these locations. By routing much of its U.S. revenue through its Braeburn Capital subsidiary in tax-free Reno, Nevada, Apple is able to avoid California's corporate tax rate of 8.84%, while also reducing its tax burden on money earned in other states.





- Apple's iTunes S.à r.l. subsidiary in Luxembourg consists mainly of a mailbox and a few dozen employees, but records $1 billion per year in revenue as the entity responsible for all iTunes Store transactions throughout Europe, Africa, and the Middle East. With the iTunes Store offering strictly downloadable goods, Apple is able to take advantage of favorable tax treatment available in Luxembourg as part of the country's efforts to attract businesses.





- Apple has substantial operations in Ireland, but the report notes that one of the main benefits of locating there is that Apple is able to internally transfer its patent royalty earnings to a subsidiary there, with the money being subjected to a 12.5% tax rate rather than the 35% tax rate found in the United States. More than one-third of Apple's worldwide revenue is booked through its Irish subsidiaries.





- Apple records 70% of its revenue overseas, even though much of the product value would normally be considered to derive from their design, which occurs in the United States.








Overall, Apple paid $3.3 billion in corporate taxes in 2011 on earnings of $34.2 billion in profits, an effective tax rate of 9.8%, which is considered low by corporate standards. But with the company's tactics relying on a complex and disjointed system of tax laws throughout the world, it is difficult for the United States to single-handedly require Apple to book more of its revenue in its home country, which currently has the highest corporate tax rates in the world when federal and average state rates are included.





Apple has provided an official response to The New York Times, highlighting its role in job creation in the United States, the tax payments it does make, and its charitable giving. The company also notes that its business practices are in full compliance with all laws and accounting rules.





Recent Mac and iOS Blog Stories

Apple Kills Off Chomp App Discovery Services for Android

Josh Gad Likely to Play Steve Wozniak in Steve Jobs Indie Film

Deus Ex: Human Revolution Arrives on the Mac App Store

LinkedIn's iOS App Goes Universal, Integrates Calendar Data

Microsoft Releases Update to Office for Mac 2011 SP2


Reduce the size of Google Chrome

Reduce the size of Google Chrome: ]Google Chrome keeps older versions of its web browser causing it to balloon in size. I noticed that the Google Chrome App on my Mac was 1.2 GB. That seemed a bit portly for a web browser. Upon looking into the app's bundle, by right-clicking and choosing Show Package Contents, I found multiple old versions of the app, all which appeared to be nearly identical. I removed all but the most recent version and everything appears to run correctly and the app size is now a much more slim 113 MB.



[kirkmc adds: Interesting. On my Mac, in the bundle, in Contents > Versions, there are, indeed, two versions of Chrome. This presumably has something to do with Chrome's silent updating. (Queries on Twitter suggest that this is the norm; a number of people replied that theirs was around 220 MB, as was mine.) Make sure you keep the one with the highest version number. You could also, of course, just download a new copy.



If you want to turn off this automatic updating, s ...



Add to digg
Add to Reddit
Add to Slashdot
Email this Article
Add to StumbleUpon



Nokia sees third credit rating cut in a row, S&P says junk

Nokia sees third credit rating cut in a row, S&P says junk: Nokia faced its third credit rating cut in a month on Friday in signs of a further confidence problem. Standard & Poor dropped Nokia's rating to junk status based on a shortfall in cash strength. While its existing cash was a "positive factor," the firm said, it expected the phone designer's cash to drop from a predicted 4.9 billion euros ($6.5 billion) to no more than four million euros ($5.3 billion)....